Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide 217
B
• Language (SPA525G only), page 230
• Miscellaneous, page 231
Call Progress Tones
Parameter Description
Dial Tone Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Bluetooth Dial Tone
(SPA525G only)
Ton e that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompt Tone Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
Busy Tone Played when a 486 RSC is received for an outbound
call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
Reorder Tone Played when an outbound call has failed or after the far
end hangs up during an established call. Reorder Tone
is played automatically when <Dial Tone> or any of its
alternatives times out.
Defaults to 480@-19,620@-19;10(.25/.25/1+2).
Off Hook Warning Tone Played when the caller has not properly placed the
handset on the cradle. Off Hook Warning Tone is
played when Reorder Tone times out.
Defaults to 480@10,620@0;10(.125/.125/1+2).

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English