Cisco SPA942 - Cisco - IP Phone User Manual

Configuring the SPA932 Attendant Console
Monitoring the SPA932
184 Cisco SPA and Wireless IP Phone Administration Guide
9
Monitoring the SPA932
To display the status of the SPA932, click the SPA932 Status link on the GUI. The
status of each attendant console attached (Unit 1 and Unit 2) is shown. Parameters
are read-only.
Server Type Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the attendant
console are returned to off, all the keys become
orange. The phone must be rebooted after the test is
completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
BLF List URI Automatically configures BLF subscriptions for all
users on a monitored list.
Unit 1 Key 1-32 Enter a strings that define the extension and other
parameters associated with each lighted button on the
first SPA932 unit. Keywords and values are case-
sensitive. The configuration script is described in
“Unit/Key Configuration Scripts” section on
page 179
.
Parameter Description

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English