Cisco SPA942 - Cisco - IP Phone

Configuring Regional Parameters and Supplementary Services
Vertical Service Announcement Codes (SPA 9X2 only)
Cisco SPA and Wireless IP Administration Phone Guide 159
8
Vertical Service Announcement Notes
Following is an example of how you can use these fields:
<Service Annc Base Number> = 1234
<Service Annc Extension Codes>=
"CWT:00;CWF:01;FAT:02;FAF:05;FBT:03;FBF:05;FNT:04;FNF:05;"
Here CWT: Call waiting service enabled;
CWF: Call waiting service disabled;
FAT: Call forward all service enabled;
FAF: Call forward all service disabled;
FBT: Call forward busy service enabled;
FBF: Call forward busy service disabled;
FNT: Call forward no answer enabled;
FNF: Call forward no answer disabled;
When the user enables call waiting service, the SPA9x2 automatically calls
"1234
00 @$proxy".
When the user
disables the call waiting service, SPA9x2 connects to
"1234
01 @$proxy".
If the <Service Annc Extension Codes> do not define CWT/CWF extension codes,
the SPA9x2 defaults to normal.
Bonus Services Announcement description
When the user enables the callback service using the *code, the SPA9x2
automatically calls “123400@$proxy.”
When the user disables the callback service using the *code, the SPA9x2
automatically connects to the “123401@$proxy.”
If the
Service Annc Extension Codes do not define CBT/CBF extension codes, the
SPA9x2 does not use this feature.
[Line1/2]<Service Announcement Serv> = Yes
[Regional]<Service Annc Base Number> = {announcement server base number}
[Regional]<Service Annc Extension Codes> = {SAEC Script}