Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA and Wireless IP Phone Administration Guide 267
B
Call Forward
See Vertical Service Activation Codes, page 221 for more information on call
forwarding parameters.
Speed Dial
Speed Dial 2 through 9: Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Defaults to blank.
NOTE Speed dial configuration has its own tab on the SPA525G and do not appear in this
section on the WIP310. Speed dial configuration from the WIP310 is done on the
phone.
Supplementary Services
The SPA9000 provides native support of a large set of enhanced or
supplementary services. All of these services are optional. Most supplementary
service parameters are listed in Supplementary Services, page 243.
Parameter Description
Cfwd All Dest Enter the extensions to forward calls to.
Cfwd Busy Dest Enter the extensions to forward calls to when the line is
busy.
Defaults to voice mail.
Cfwd No Ans Dest Enter the extension to forward calls to when the call is
not answered.
Defaults to voice mail.
Cfwd No Ans Delay Enter the time delay in seconds to wait before
forwarding a call that is not answered.
Defaults to 20 seconds.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English