Cisco SPA942 - Cisco - IP Phone User Manual

Configuring the SPA932 Attendant Console
Setting Up the SPA932 Attendant Console
176 Cisco SPA and Wireless IP Phone Administration Guide
9
Configuring the SPA9000 for the SPA932
You must still enable Computer Telephony Integration (CTI) on the SPA9000 web
UI, as shown in the following procedure:
STEP 1 Connect to the web UI for the SPA9000.
STEP 2 Click Admin Login on the web UI page.
STEP 3 If necessary, enter admin and your password, then Advanced.
STEP 4 Click the SIP tab.
STEP 5 In the SIP Parameters section, select yes from the CTI Enable drop-down list.
STEP 6 Click Submit All Changes.
Configuring the BroadSoft Server for the SPA932
The BroadSoft server requires you to assign IP phone users to the Busy Lamp
(BLF) Monitor Users List. The BroadSoft server sends updates on the status of
each phone on this list to the SPA932, which subscribes for this service.
To configure the BroadSoft server to support the SPA932:
STEP 1 On the BroadSoft server, in the user profile used by the phone to register with the
BroadSoft server, select Assign Services.
STEP 2 On the Assign Services page, from the Available Services column, move Busy
Lamp to the User Services column.
STEP 3 Define the List URI used by the SPA932 to register for BLF monitoring service with
the BroadSoft server. This value must match the value entered following the sub
= keyword (for example, cisco_list). Select the domain from the drop-down list
to match the Unit Key.
NOTE: If you configure more than one
monitored list on the BroadSoft server, use the
vid=
keyword in each unit/keyconfiguration
script to specify the phone extension to use for
each list.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English