Cisco SPA942 - Cisco - IP Phone User Manual

Configuring the SPA932 Attendant Console
Setting Up the SPA932 Attendant Console
182 Cisco SPA and Wireless IP Phone Administration Guide
9
BroadSoft syntax
For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a BroadSoft
server with the IP address 192.168.100.1:
fnc=sd+blf;sub=marketing@192.168.100.1;usr=reception@192.168.100.1
The nme keyword is not used because the BroadSoft server uses the user
account name assigned to the BLF monitoring list.
Note that you can configure a list of BLF subscriptions automatically using a URI
(rather than individually configuring each BLF entry). See the “Configuring
BroadSoft Busy Lamp Field Auto-Configuration (SPA525G)” section on
page 182.
Asterisk syntax
The following is an example entry for a Asterisk server. This entry enables speed
dialing, BLF monitoring, and call pickup on a Asterisk server with the IP address
192.168.1.11:
fnc=sd+blf+cp;sub=35890@192.168.1.11;nme=35890
Configuring BroadSoft Busy Lamp Field Auto-Configuration
(SPA525G)
Rather than configuring each BLF key individually, you can enter a single
SUBSCRIBE URI and automatically generate configuration scripts for BLF keys for
all users on the monitored list.
To configure BLF auto-configuration:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login.
STEP 3 Click advanced.
STEP 4 Click the Att Console tab.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English