Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA and Wireless IP Phone Administration Guide 266
B
User Tab
This section describes the fields for the following headings on the User tab:
• Call Forward, page 267
• Speed Dial, page 267
• Supplementary Services, page 267
• Web Information Service Settings (SPA962/SPA525G), page 268
• Traffic Service Information Settings (SPA962), page 268
• Audio Volume, page 269
• Screen (SPA525G), page 269
• Phone GUI Menu Color Settings (SPA962 only), page 271
Parameter Description
Dial Plan Dial plan script for this line.
The default is (<9:>xx.)
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
The dial plan syntax is expanded in the SPA to allow the
designation of three parameters to be used with a
specific gateway:
• uid – the authentication user-id
• pwd – the authentication password
• nat – if this parameter is present, use NAT mapping
Each parameter is separated by a semi-colon (;).
Enable IP Dialing Enable or disable IP dialing.
Defaults to no.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English