Cisco SPA942 - Cisco - IP Phone User Manual

Configuring the SPA932 Attendant Console
Monitoring the SPA932
Cisco SPA and Wireless IP Phone Administration Guide 185
9
SPA932 Unit Monitoring Notes
The following table describes each parameter; both units display the same
parameters.
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After
the subscription expires, the SPA932 automatically
requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is connected or not.
Subscribe Retry Interval Displays the length of time the SPA932 waits to try
again if subscription fails.
SW Version Displays the version of the software currently running
on the unit.
Key Name Displays the name assigned to each key (1-32) on the
SPA932 attendant console unit.
Type Displays the function enabled for each key (1-32) on the
SPA932 attendant console unit.
Line Displays the extension assigned to each key (1-32) on
the SPA932 attendant console unit.
Station Displays the subscribe URI configured for each key (1-
32) on the SPA932 attendant console unit.
Subscribe Displays the subscription status of the unit/key. The
value can be Yes, Fail, or No. No indicates that the
feature/function (fnc) of that line does not require a
subscription (such as speed dial).

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English