SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide 227
B
Vertical Service Announcement Codes
• Service Annc (Announcement) Base Number: Defaults to blank.
• Service Annc (Announcement) Extension Codes: Defaults to blank.
Outbound Call Codec Selection Codes
These codes automatically appended to the dial-plan. You do not need to include
them in the dial-plan.
Parameter Description
Prefer G711u Code Makes this codec the preferred codec for the
associated call.
Defaults to *017110.
Force G711u Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *027110.
Prefer G711a Code Makes this codec the preferred codec for the
associated call.
Defaults to *017111
Force G711a Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *027111.
Prefer G722 Code Makes this codec the preferred codec for the
associated call.
Defaults to *01722.
NOTE SPA525G only. Only one G.722 call at a time is
allowed. If a conference call is placed, a SIP re-invite
message is sent to switch the calls to narrowband
audio.
To Next Page
Loading...
