SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide 228
B
Force G722 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02722.
NOTE SPA525G only. Only one G.722 call at a time is
allowed. If a conference call is placed, a SIP re-invite
message is sent to switch the calls to narrowband
audio.
Prefer L16 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *01016.
Force L16 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02016.
Prefer G723 Code Makes this codec the preferred codec for the
associated call.
Defaults to *01723.
NOTE Not applicable to WIP310 or SPA525G.
Force G723 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *02723.
NOTE Not applicable to WIP310 or SPA525G.
Prefer G726r16 Code Makes this codec the preferred codec for the
associated call.
Defaults to *0172616.
NOTE Not applicable to WIP310 or SPA525G.
Force G726r16 Code Makes this codec the only codec that can be used for
the associated call.
Defaults to *0272616.
NOTE Not applicable to WIP310 or SPA525G.
Parameter Description
To Next Page
Loading...
