Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
SPA932 Status
Cisco SPA and Wireless IP Phone Administration Guide 273
B
For more information, see “Setting Up the SPA932 Attendant Console” section
on page 175.
Unit 2
See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second SPA932 unit.
Keywords and values are case-sensitive. The configuration script is described in
“Setting Up the SPA932 Attendant Console” section on page 175.
SPA932 Status
This page provides two tabs to display the status of up to two SPA932 units that
are supported by a single SPA962:
• Unit 1—Displays information about the first SPA932 unit.
• Unit 2—Displays information about the second SPA932 unit.
Each tab provides the read-only fields described in the following table:
Parameter Description
Unit Enable Displays if the Unit is enabled or disabled.
Subscribe Expires Displays when the current subscription expires. After
the subscription expires, the SPA932 automatically
requests a new subscription.
HW Version Displays the version of the hardware.
Unit Online Displays whether the unit is powered on and
connected or not.
Subscribe Retry Interval Displays the length of time the SPA932 waits to try
again if subscription fails.
SW Version Displays the version of the software currently running
on the unit.
Key Name Displays the name assigned to each key (1-32) on the
SPA932 unit.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English