Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA and Wireless IP Phone Administration Guide 269
B
Audio Volume
NOTE Does not apply to the WIP310.
Screen (SPA525G)
Parameter Description
Ringer Volume Sets the default volume for the ringer.
Speaker Volume Sets the default volume for the full-duplex speakerphone.
Handset Volume Sets the default volume for the handset.
Headset Volume Sets the default volume for the headset.
Parameter Description
Screen Saver Enable Enables a screen saver on the phone’s LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
“Press any key to unlock your phone.”) If a user password is
set, the user must enter it to exit screen saver mode.
Screen Saver Type
Choose the type of screen saver:
•
Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles
from black to gray.
• Picture Rotation—The screen rotates through available
pictures on the phone.
• Digital Frame—Shows the background picture.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English