Cisco SPA942 - Cisco - IP Phone

SPA and Wireless IP Phone Field Reference
User Tab
Cisco SPA and Wireless IP Phone Administration Guide 270
B
Screen Saver Trigger
Time
Number of seconds that the phone remains idle before
the screen saver turns on.
Screen Saver Refresh
Time
Number of seconds before the screen saver should refresh
(if, for example, you chose a rotation of pictures).
Text Logo Text logo to display when the phone boots up. A service
provider, for example, can enter logo text as follows:
• Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between lines
• Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
For more information, see the “Configuring Phone
Information and Display Settings” section on page 47.
BMP Picture Download
URL
URL locating the bitmap (.BMP) file to display on the LCD
background.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 47
.
Logo Type Select from Default, Download BMP Picture, or Text Logo.
Defaults to Default.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 47
.
Background Picture
Typ e
Select from Default, Download BMP Picture, or None.
Defaults to Default.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 47.
LCD Contrast Enter a number value from 1 to 30. The higher the number,
the greater the contrast on the screen.
Back Light Enable Select yes to enable the screen back light.
Parameter Description