SPA and Wireless IP Phone Field Reference
Ext Tab
Cisco SPA and Wireless IP Phone Administration Guide 252
B
Ext Tab
The Ext tabs vary by phone:
• SPA922 and WIP310: Ext 1 tab
• SPA942: Ext 1, 2, 3,and 4 tabs
• SPA962: Ext 1, 2, 3, 4, 5, and 6 tabs
• SPA525G: Ext 1, 2, 3, 4, and 5 tabs
This section describes the fields for the following Ext tab headings:
• Share Line Appearance, page 253
• NAT Settings, page 253
• Network Settings, page 254
• SIP Settings, page 255
• Call Feature Settings, page 258
• Proxy and Registration, page 260
• Subscriber Information, page 262
• Audio Configuration, page 263
• Dial Plan, page 265
In a configuration profile, the Line parameters must be appended with the
appropriate numeral to indicate the line to which the setting applies. For example:
[1] to specify line one
[2] to specify line two
General
Line Enable: To enable this line for service, select yes. Otherwise, select no.
Defaults to yes.
To Next Page
Loading...
