Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
Info Tab
Cisco SPA and Wireless IP Phone Administration Guide 192
B
Secondary DNS Displays the secondary DNS server assigned to the
SPA9000.
NTP Enable (SPA525G only) Shows if Network Time Protocol is enabled.
Primary NTP Server
(SPA525G only)
IP Address of the primary NTP server.
Secondary NTP Server
(SPA525G only)
IP Address of the secondary NTP server.
TFTP Server (SPA525G only) Address of the TFTP server for provisioning.
Bluetooth Enabled (SPA525G
only)
Shows if Bluetooth is enabled.
Bluetooth Firmware Version
(SPA525G only)
Displays the Bluetooth firmware version.
Bluetooth Connected
(SPA525G only)
Shows if a Bluetooth device is connected to the phone.
Bluetooth MAC (SPA525G
only)
Shows the hardware address of the Bluetooth device.
Connected Device ID
(SPA525G only)
Shows the name of the connected Bluetooth device.
Wireless Enabled (SPA525G
only)
Shows if Wireless-G is enabled on the phone.
Wireless Connected
(SPA525G only)
Shows if the phone is connected to the wireless
network.
Wireless MAC (SPA525G
only)
Shows the hardware address of the Wireless-G
controller.
SSID (SPA525G only) Shows the SSID, or name of the wireless router to
which the phone is connected.
Standard Channel (SPA525G
only)
Shows the wireless channel being used in the wireless
connection.
Security Mode (SPA525G
only)
Shows if wireless security is configured on the phone
(yes or no).
Parameter Description

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English