Cisco SPA942 - Cisco - IP Phone User Manual

Configuring Regional Parameters and Supplementary Services
Localizing Your IP Phone
166 Cisco SPA and Wireless IP Administration Phone Guide
8
Field Description
Set Local Date
(mm/dd)
Enter the local date ( mm represents the month and dd represents
the day). The year is optional and uses two or four digits. For
example,
May 1, 2008, can be entered as:
05/01 or 05/01/08 or 05/01/2008
Set Local Time
(HH/mm)
Enter the local time (
hh represents hours and mm represents
minutes). Seconds are optional.
Time Zone Selects the number of hours to add to GMT to generate the local
time for caller ID generation. Choices are GMT-12:00, GMT-
11:00,…, GMT, GMT+01:00, GMT+02:00, …, GMT+13:00.
Defaults to GMT-08:00.
Time Offset (HH/
mm)
This specifies the offset from GMT to use for the local system
time.
Daylight Saving
Time Rule
Enter the rule for calculating daylight saving time. See the
“Configuring Daylight Savings Time” section on page 167.
Daylight Saving
Enable
Select yes to enable or no to disable DST on the SPA9x2. This
setting affects all lines (extensions) on the phone.
Dictionary Server
Script
Defines the location of the dictionary server, the languages
available and the associated dictionary. See the “Creating a
Dictionary Server Script” section on page 171.
Language
Selection
Specifies the default language. The value must match one of the
languages supported by the dictionary server. The script (dx
value) is as follows:
<Language_Selection ua="na">
</Language_Selection>
Defaults to blank; the maximum number of characters is 512. For
example:
<Language_Selection ua="na"> Spanish
</Language_Selection>

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English