SPA and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide 223
B
Block CID Act Code Blocks caller ID on all outbound calls.
Defaults to *67.
Block CID Deact Code Removes caller ID blocking on all outbound calls.
Defaults to *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
Defaults to *81.
Block CID Per Call Deact
Code
Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block ANC Act Code Blocks all anonymous calls.
Defaults to *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
Defaults to *87.
DND Act Code Enables the do not disturb feature.
Defaults to *78.
DND Deact Code Disables the do not disturb feature.
Defaults to *79.
Secure All Call Act Code Makes all outbound calls secure.
Defaults to *16.
Secure No Call Act Code Makes all outbound calls not secure.
Defaults to *17.
Secure One Call Act Code Makes the next outbound call secure. (It is redundant if
all outbound calls are secure by default.)
Defaults to *18.
Secure One Call Deact Code Makes the next outbound call not secure. (It is
redundant if all outbound calls are not secure by
default.)
Defaults to *19.
Parameter Description
To Next Page
Loading...
