SPA and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA and Wireless IP Phone Administration Guide 237
B
Text Logo Text logo to display when the phone boots up. A
service provider, for example, can enter logo text as
follows:
• Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between lines
• Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page 269.
BMP Picture Download URL URL locating the bitmap (.BMP) file to display on the
LCD background.
For more information, see the “Configuring Phone
Information and Display Settings” section on
page 47
.
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page 269.
Select Logo Select from Default, BMP Picture, Text Logo, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page 269.
Select Background Picture Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page 269.
Parameter Description
To Next Page
Loading...
