Configuring Lines and Extensions
Configuring Lines
Cisco SPA and Wireless IP Phone Administration Guide 43
3
Local Progressing
LED
Appears when this station attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Remote Progressing
LED
(applicable only to
shared call
appearance)
Appears when another station attempts an outbound call on
this shared call appearance.
Defaults to blank (c=r; p=d).
Local Ringing LED Appears when the call appearance is ringing.
Defaults to blank (c=r;p=f).
Remote Ringing LED
(applicable only to
shared call
appearance)
Appears when the shared call appearance is in ringing on
another station.
Defaults to blank (c=r;p=d).
Local Active LED Appears when the call appearance is engaged in an active call.
Defaults to blank (c=r).
Remote Active LED
(applicable only to
shared call
appearance)
Appears when another station is engaged in an active call on
this shared call appearance.
Defaults to blank (c=r;p=d).
Local Held LED Appears when the call appearance is held by this station.
Defaults to blank (c=r;p=s).
Remote Held LED
(applicable only to
shared call
appearance)
Appears when another station places this call appearance on
hold.
Defaults to blank (c=4,p=s).
Register Failed LED LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank
indicates the default value of c=a.
Disabled LED LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
Parameters Description
To Next Page
Loading...
Need help?
General
