202 Gateway and Gateway 4 Manual v1.2
© Tieline Research Pty. Ltd. 2021
4. Click Save to store the new configuration.
MIB Files for SNMP Configuration
Management Information Base (MIB) files are required for SNMP applications to interact with your
Tieline codec and interpret SNMP data. The codec supports SNMPv1 and SNMPv2 MIB protocols.
Click the Download MIB files button to download the MIB .zip file to a PC and import the contents
into the MIB browser used to manage SNMP-enabled network devices.
MIB files can also be downloaded from the codec using the following link in a web browser on a
device connected to the same network as the codec:
· http://<YOUR_CODEC_ADDRESS>/mibs/tieline-mibs.zip
Important Note:
· The codec supports the attributes specified in the MIB-II standard. Please verify that your
SNMP software contains the required files as specified in RFC 1213. An example of a
free MIB browser is available at http://www.ireasoning.com/.
· Tieline recommends SNMP is disabled if a codec is connected to a public network like the
internet. Adjust settings using the Toolbox HTML5 Web-GUI Options panel in the
Firewall tab, or see Firewall Configuration.
To Next Page
Loading...
