134 Gateway and Gateway 4 Manual v1.2
© Tieline Research Pty. Ltd. 2021
23.12 Default Program Ports
· Supports port configuration for up to 4 peer-to-peer audio
streams.
· Supports port configuration for one multi-unicast and multicast
audio stream
· Supports port configuration for up to 8 peer-to-peer audio
streams in Gateway 8 and up to 16 peer-to-peer audio streams
in Gateway 16
· Supports port configuration for up to 6 different multi-unicast
audio streams, or up to 8 different multicast streams in Gateway
8, and 16 different multicast streams in Gateway 16
The following table displays the default TCP and UDP ports used when configuring audio stream
connections over IP using different program types. It is a good idea to keep a record when changing
these default port numbers, to ensure a record of these settings is maintained in case it is
necessary to reconfigure the codec in the future. To view other important ports that need opening for
SIP, Fuse-IP, Web-GUI use and G3 Toolbox software, please see Installing the Codec at the Studio
in this user manual.
Default Multi-Unicast Audio Stream Ports
To Next Page
Loading...
