Supports up to 8 multi-unicast audio streams in Gateway 8 and up
to 16 multi-unicast streams in Gateway 16 being sent to up to 80
endpoints in total. For example, 4 separate audio streams can
each be streamed to 20 endpoints.
Important Notes: Before you start program configuration please note:
· You cannot edit a program when it is currently loaded in the codec.
· Lock a loaded custom program or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
· If a codec supports multiple stream programs and the Auto (default) reference level
is selected, the first codec to connect will configure the reference level used for all
subsequent connections. I.e. If a G3 codec connects first then the G3 Audio
Reference Level will be configured for all connections.
· All streams must be dialed initially for a multi-unicast program. Streams can be
disconnected and dialed individually after this.
· Connections are "dial only" for multi-unicast programs.
· Up to 80 streams of 24 bit, 48kHz PCM audio are supported. 24 bit, 96kHz PCM is
not supported for multi-unicast audio streams.
To Next Page
Loading...
