InteliCompact
NT
, SW version 2.1
InteliCompact-NT-2.1-Reference Guide.pdf, ©ComAp – May 2015
Binary output: Ready To Load
The output is closed whenever the GCB is closed or can be closed. Details
about conditions when the GCB can be closed are available in the chapter
Connecting to the load.
Binary output: Synchronizing
The output is closed during forward or reverse synchronizing.
The output is designed to be used as an indication that the gen-set is
running. It is activated at the moment the gen-set has been started and the
idle period has elapsed. It remains active until stop command is issued.
The output is closed whenever the GCB is closed except the unloading
phase prior to opening the GCB.
The output is closed during the unloading phase (ramping the power down)
prior to opening the GCB. More detailed description is available in the
chapter Parallel to mains operation.
Binary output: AnalogSwitch 1
This is an output from the Analog switch 1.
Binary output: AnalogSwitch 2
This is an output from the Analog switch 2.
To Next Page
Loading...
