InteliDrive DCU Industrial 3.4.0 Global Guide
129
Setpoint group Engine protect Related FW 3.4.0
Range [units] 0 .. 60 [s]
Default value 0
Force value Alternative
config
Step 1
Comm object 10571 Related applications AS, SS
Description
Delay for Force block protection activation after binary input Force Block 3 is opened. Protection
deactivation is without delay. Protection is activated/deactivated independent on engine running or not
running state.
ForceBlockDel3
6 back to List of setpoints
Setpoint group Engine protect Related FW 3.4.0
Range [units] 0 .. 200 [%]
Default value 110
Force value
Alternative config
Step 1% of Nominal RPM (page 104)
Comm object 8263 Related applications AS, SS
Description
Threshold for engine overspeed protection.
Overspeed
6 back to List of setpoints
Setpoint group Engine protect Related FW 3.4.0
Range [units] 0 .. Starting RPM (page 115) [RPM]
Default value 30
Force value
Alternative config
Step 1
Comm object 8260 Related applications AS, SS
Description
Underspeed alarm is activated when engine is running and actual RPM is below the UnderSpeed threshold.
UnderSpeed
6 back to List of setpoints
To Next Page
Loading...
