InteliDrive DCU Industrial 3.4.0 Global Guide
224
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
Pickup fail indication. Pickup fail: lost of RPM signal in running state (other running indication is active).
Pickup Fail
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
ID-DCU Industrial controller reset during Cranking state (see Crank Attempts (page 118)).
Battery Flat
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 1293
Description
Indication when battery voltage (ID-DCU Industrial power supply) is out of Batt > V (page 130) and Batt <
V (page 130) limits.
Battery Volt
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
Output is closed when Service time (count down) = 0.
Note: History record and Alarm list indication is activated as well.
WrnService Time
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object
Description
The lubrication cycle (PrelubrTime) is not finished after controller Switch on or return from OFF mode.
Not Lubricated
6 back to List of LBO
To Next Page
Loading...
