Cyan Z-Series Engineering and Planning Guide Release 5.0
Page 196 © 2013 Cyan, Inc. – All Rights Reserved. 700-0023-05-00 Rev. 1
• Static routes
The Planet Operate server can be configured with static routes to reach the non-gateway Cyan
nodes. In the network configuration example above, the following routes would enable the Planet
Operate server to communicate with all Cyan nodes:
10.1.1.4 / 255.255.255.255 / gw 10.2.1.1
10.1.1.5 / 255.255.255.255 / gw 10.2.1.1
10.1.1.6 / 255.255.255.255 / gw 10.2.1.1
• Partial OSPF routing
Enable OSPF on the router and the gateway Cyan node. This allows the router to learn about the
other Cyan nodes.
Add static routes to the Planet Operate server to reach the Cyan nodes. In the network configuration
example above, the following routes will enable the Planet Operate server to communicate with the
other Cyan nodes:
10.1.1.4 / 255.255.255.255 / gw 10.2.1.1
10.1.1.5 / 255.255.255.255 / gw 10.2.1.1
10.1.1.6 / 255.255.255.255 / gw 10.2.1.1
• OSPF routing
Enable OSPF on the Planet Operate server and the Cyan gateway node for the Planet Operate server
to learn all of the routing information.
To Next Page
Loading...