Cyan Z-Series Engineering and Planning Guide Release 5.0
700-0023-05-00 Rev. 1 © 2013 Cyan, Inc. – All Rights Reserved. Page 89
reserved for the in-band management channel is returned to the PSW 10G fiber port for payload. Disabling
Topology Discovery also prevents the system from displaying a topology line in addition to the OSC line to
the adjacent node in the 3D Network view tab.
2.7.1 System Requirements
Cyan Z77, software version Release 5.0 or higher
2.7.2 Ethernet Services and Standards
• MEF EPL, EVPL and E-LAN services with local bridging between UNI-N and NNI port
• VLANs (IEEE 802.1Q)
• Q-in-Q (IEEE 802.1ad)
• MAC bridging (IEEE 802.1D)
• 2,000 TESIs
• Connection oriented Ethernet (COE) support:
Provider Backbone Bridging - IEEE 802.1ah
Provider Backbone Bridging (Traffic Engineering) - IEEE 802.1Qay
• Ethernet Ring Protection ITU-T G.8032v2 with sub-50ms switch times
• Spanning tree (IEEE 802.1D), multiple spanning tree (IEEE 802.1s), and Rapid Spanning Tree
(IEEE 802.1w) support (planned for a future release)
• P-bit priority QoS (IEEE 802.1p)
• 8 class of service queues per port
2.7.3 Optical Transport
• 6 x 10 GbE/SFP+ plus 18 x GbE (10/100/1000) SFP
• Up to 4 optional ODU2 mappers
• ITU-T G.975 Generic Forward Error Correction (GFEC) and Enhanced Forward Error Correction
(EFEC)
2.7.4 Interfaces
• 6 x 10 GbE LAN/WAN and 18 GbE (10/100/1000) LAN
• Physical: Front access, SFP+ and SFP
2.7.5 Management
• ITU-T G.709 and OTN support on all DWDM interfaces
• SNMP v2
• CLI and TL1
• A – Z circuit provisioning using Planet Operate (TESI provisioning only in this Release)
To Next Page
Loading...