Cyan Z77 - LAD OSC Specifications; Management; Physical

Cyan Z-Series Engineering and Planning Guide Release 5.0
700-0023-05-00 Rev. 1 © 2013 Cyan, Inc. – All Rights Reserved. Page 57
2.1.2 LAD OSC Specifications
The following OSC specifications apply to all LAD modules (except the LAD-2P and LAD-2G, which do
not provide an OSC):
• Frequency: 198.5 THz 1510nm
• Data Format: 100Base-FX
• Maximum TX Power: 5 dBm Ethernet
• Minimum TX Power: -1 dBm (LAD-8X: +1 dBm)
• Maximum RX Power: -3 dBm (LAD-8X: -7 dBm)
• Minimum RX Power: -33 dBm (LAD-8X: -43 dBm)
• OSC Link Budget: 8 – 32 dB (LAD-8i OSC link budget: 5 – 22 dB)
(LAD-8X OSC link budget: 12 – 44 dB)
Note: If you are using CyOS 3.x, RX power at -10 dBm or higher will raise a High RX power
alarm. If you are using CyOS 4.x or higher, RX power at -10 dBm or higher does not raise a High
RX power alarm, but an "Out of Range – High" notification will be displayed in Planet Operate in
the Transport Resources tab for the LAD OSC.
2.1.3 Management
• DCN connectivity
• A – Z circuit provisioning using Planet Operate
• SNMP v2
• CLI
• TL1
2.1.4 Physical
• LAD-2P and LAD-2G module dimensions:
 Depth: 11.5" / 292 mm
 Width: .9" / 23 mm
 Height: 5.8" / 147 mm
• LAD-4, LAD-4A, LAD-8, LAD-8i, LAD-8A, LAD-8E, LAD-8X, LAD-40, LAD-40E module
dimensions:
 Depth: 11.6" / 295 mm
 Width: 1.2" / 30.5 mm
 Height: 13.8" / 350 mm
• AWG-40 dimensions:
 Depth: 12" / 304.8 mm
 Width: 19" / 482.6 mm
 Height: 3.5" / 88.9 mm, 2
RU
• AWG-40 weight: 8.4 lbs / 3.7 kg