ENGLISH
60
1. GENERAL INFORMATION
Inverter designed to be housed directly on the motor of three-phase pumps, for the pressurisation of the
hydraulic circuits by the measurement of pressure and optionally also flow measurement.
The inverter maintains the pressure value in a hydraulic circuit constant by varying the rpm of the electric
pump; the inverter is switched on and off by sesnors according to hydraulic requirements.
There are a wide range of operating modes and optional accessories. By means of the various possible
settings and availability of configurable inputs and outputs, operation of the inverter can be adapted to meet
the requirements of all systems. 6 SIGNIFICATO DEI SINGOLI PARAMETRI specifies the various settable
values: pressure, protection cut-out trip, frequency of rotation, etc.
From here onwards, in this manual, the abbreviated term “inverter” will refer to specifications common to the
models MCE-55/P and MCE-30/P.
1.1 Applications
Possible applications include:
- homes
- apartment blocks
- camp sites
- swimming pools
- farms
- well water supply
- irrigation for greenhouses, gardens, agriculture
- re-use of rainwater
- industrial systems
Figure 1: Layout and dimensions
To Next Page
Loading...
