Daedong DK4520 - Page 219

58
8
-
49
MAINTENANCE
FRONT TURN SIGNAL LAMP AND POSITION LAMP
1. The front turn signal lamps are in-
stalled onto the ROPS frame.
2.
Loosen the screw to remove the lens.
3. Remove the bulb by turning its
socket counterclockwise. Install a
new bulb.
D22O721A TD2O745A
(1) Screw (2) Lens (1) Turn Signal Lamp Bulb
(2) Position Lamp Bulb
(1) Rear LED Work Lamp
REAR LED WORK LAMP (OPTION)
For the LED work lamps, when they
need replacement, replace the whole
assembly. If a malfunction occurs,con-
tact your local Dealer.
T22O701A
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 49OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 49 2023-09-22 오전 11:36:192023-09-22 오전 11:36:19