13-20
Front Wheel/Front Fork/Steering
• If the motorcycle had caused an accident, check
the steering head pipe for crack of damage.
● Tighten the top thread.
Torque: 1.8kgf
Tools:
Steering stem socket
Extension bar
● Move the steering stem from side to side 4-5
times, and allow the steel ball to operate.
● Loosen the top thread, and tighten the final
torque again.
Torque: Thread 0.3kgf-m
● Install the top bridge washer steering stem nut.
● After installing R.L front fork temporally,
install the steering stem nut and tighten it.
Torque: 7.0kgf-m
Tools:
Lock nut wrench 30×32mm
Extension bar
● After arranging the cable, install the cable
guide.
● Install the front fork. (⇨13-11)
NOTE
Steering
Stem Socket
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top BridgeTop Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mmLock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Lock Nut Wrench 32X32mm
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top BridgeTop Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge
Top Bridge