DAELIM DAYSTAR Service Manual

14-5
Rear Wheel/Rear Brake/Suspension
● Coat the bearing with the grease.
● Insert the new bearing in parallel with the seal
side facing outside. After inserting the
distance collar, insert the bearing of the right
side with the seal side facing outside.
Tools:
Driver
Attachment
Pilot, 15mm
● Make the part in protection ring face the
outside, and connect the final driven sprocket.
Install the snap ring into the groove exactly.
• Install the snap ring into the groove exactly.
● If the driven sprocket nut was removed, install
the nut after aligning the flange part of fixing
bolt with the sprocket inside groove.
Torque: 5.9kgf-m(59N.m)
● Attach the side collar.
Installation
● Install the brake panel into the rear wheel.
● Align the rear fork stooper with the slot of the
brake panel.
● Install the drive chain into the sprocket.
Assembly
● Install the dust seal after applying the grease.
● If the damper rubber was removed, install the
damper rubber.
NOTE
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper RubberDamper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper RubberDamper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Damper Rubber
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust SealDust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Dust Seal
Side Collar
Side Collar
Side Collar
Side Collar
Side Collar
Side CollarSide Collar
Side Collar
Side Collar
Side Collar
Side Collar
Side Collar
Side Collar

Part

Part

Part

Part

Part

Part

Part

Part

Part

Part

Part

Part

Part

DAELIM DAYSTAR Specifications

General

Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Engine Type	4-Stroke, Air-cooled
Displacement	124 cc
Transmission	5-speed
Fuel Capacity	12.5 liters
Weight	125 kg
Rear Suspension	Dual shock absorbers