1-7
General Information
!
WARNING
△
Safety Notices
Following marks indicate some warnings and caution against some specific service methods.
The following symbols indicate needed lubrication steps, the changing of parts, and required specialized
tools, etc. when performing maintenance
Special greases, etc. that do not correspond to the above are indicated without using symbols.
Symbol Caution Symbol Caution
Mark Meaning Mark Meaning
Indicates a strong possibility of
severe personal injury or loss of
life if instructions are not
followed
Use recommended engine oil,
unless otherwise specified
Use molybdenum oil solution
(mixture of the engine oil and
molybdenum grease with the
ratio 1:1)
Use multi-purpose grease
(Lithium based multi-purpose
grease NLGI #2 or equivalent)
Use molybdenum disulfide
grease (containing more than
3% molybdenum disulfide,
NLGI #2 or equivalent)
Use molybdenum disulfide
paste containing more than
40% molybdenum disulfide,
NLGI #2 or equivalent)
Use silicone grease
Apply a locking agent. Use the
agent of the middle strength,
unless otherwise specified
Apply sealant
Replace the parts with new
ones before assembly
Use brake fluid, DOT3 or DOT4.
Use the recommended brake
fluid, unless otherwise specified.
Use Forkor Suspension Fluid
Use special tool
Use optional tool. These tools
are obtained as you order parts
Indicates reference page.
(Example: Refer to page 3-1)
(⇨ 3-1)
Indicates a possibility of
personal injury or equipment
damage if instructions are not
followed.
Gives helpful information
NOTE
!
CAUTION
△
O.P. TOOL
S TOOL
CUSHION
OIL
To Next Page
Loading...
Need help?
General
