User’s Manual EM11A015B
intelligent Touch Manager
198
3. Display the Registration screen and register the group members.
(6) (7)
(6) is the list of registered management points registered with the group while (7) is the list of
management points that can be registered.
To add a management point, select one from (7) and touch the Add button. To remove a
management point, select one from (6) and touch the Remove button.
The management points you can register are limited to indoor units. You can register up to 512
indoor units in one group. You cannot register the same indoor unit in multiple groups.
When nished, touch the OK button to return to the Temperature Limit screen.
• For indoor units without the Changeover option, make sure an indoor unit that uses the
same refrigerant and has Changeover option is registered in the same group.
• Indoor units to be subject to the same control can be registered in the same group even if
they are not located in the same space.
NOTE
To Next Page
Loading...
