Daikin DCM601A52 - Page 299

User’s Manual EM11A015B
intelligent Touch Manager
298
<Regarding the operation of D3Chiller management points>
■
Cautions when monitoring/setting up a D3Chiller
• The total operation of a D3Chiller unit (or a D3Chiller plant interlocking pumps and others)
from intelligent Touch Manager should be ensured by mechanical the installers and control
engineering rms.
<Regarding the operation of AHU management points>
■
Cautions when monitoring/setting up an AHU
• An AHU management point can read and write the specific objects on a MicroTech III
controller (POL638.70/STD) which is embedded in an AHU via BACnet/IP connection.
On that basis, the total operation of an AHU from intelligent Touch Manager should be ensured
by mechanical the installers and control engineering rms.
<About Web Access function>
■
The screen for the Web access function is not displayed correctly.
• Network settings may be at fault.
Correct network settings are necessary for using the Web access function.
For details of network settings, see “9-1 Network Settings”.
• Screen may not display correctly if old content is stored in the browser’s cache.
When accessing iTM with a PC, the following message is displayed if old content is stored in
the browser’s cache.
Please clear the browser’s cache.
Cache clear procedure of the browser’s‚ see “Peripheral Equipment Specifications
(CB14A005)”.