Falcon™ 4-CLHS Series Operational Reference 29
UserSet 1 UserSet1 Select the User Defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
UserSet 2 UserSet2 Select the User Defined Configuration space
UserSet2 to save to or load from features
settings previously saved by the user.
Load User Set UserSetLoad Loads the camera configuration set specified
by the User Set Selector feature, to the
camera and makes it active.
1.00
Beginner
Save User Set UserSetSave
Saves the current camera configuration to the
user set specified by the User Set Selector
feature.
1.00
Beginner
Serial Number DeviceID Displays the device’s factory set camera serial
number.
1.00
Invisible
Device TL Version Major DeviceTLVersionMajor Major version of the device’s Transport Layer. 1.00
Invisible
Device TL Version Minor DeviceTLVersionMinor Minor version of the device’s Transport Layer.
1.00
Invisible
Temperature Monitor temperatureMonitorON Turn on/off the temperature monitor function. 1.00
DFNC
Invisible
DFNC Major Rev deviceDFNCVersionMajor Major revision of Dalsa Feature Naming
Convention which was used to create the
device’s XML.
1.00
DFNC
Invisible
DFNC Minor Rev deviceDFNCVersionMinor Minor revision of Dalsa Feature Naming
Convention which was used to create the
device’s XML.
1.00
DFNC
Invisible
SFNC Major Rev DeviceSFNCVersionMajor
Major Version of the Genicam Standard
Features Naming Convention which was used
to create the device’s XML.
1.00
DFNC
Invisible
SFNC Minor Rev DeviceSFNCVersionMinor
Minor Version of the Genicam Standard
Features Naming Convention which was used
to create the device’s XML.
1.00
DFNC
Invisible
SFNC SubMinor Rev DeviceSFNCVersionSubMinor
SubMinor Version of the Genicam Standard
Features Naming Convention which was used
to create the device’s XML.
1.00
Invisible