REDUNDANT AND BIDIRECTONAL SYSTEMS
75
SC5100 CONTROLLER
BIDIRECTIONAL SETUP
A Datalogic Bidirectional system is a system that accommodates an application where
the customer can change the direction of the conveyor. To accommodate a Bidirectional
system an additional photocell is required, as well as other special equipment and spe-
cific software settings.
Use
Bidirectional Settings to define how your system will recognize each direction.
To view and edit the Bidirectional Settings:
1. In the menu under Modify Settings, navigate to Global Settings | Operating
Mode.
The Operating Mode window opens.
2. Click the
Bidirectional PackTrack Enable check-box. The following Bidirectional
options become available.
NOTE: The Operating Mode must be set to PackTrack for this option to be
available.
To Next Page
Loading...
