Dell 8 - Clear Lldp Neighbors

Dell Converged Enhanced Ethernet Command Reference 101
53-1002115-01
clear lldp neighbors
6
clear lldp neighbors
Clears the Link Layer Discovery Protocol (LLDP) neighbor information on all or specified interfaces.
Synopsis clear lldp neighbors interface [{in | ex}tengigabitethernet slot/port]
Operands interface Use this keyword to specify the 10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to clear the LLDP neighbor information about the devices learned through an
interface.
Usage
Guidelines
If the interface operand is not specified, this command clears the LLDP neighbor information
received on all the interfaces.
Examples To clear the LLDP information for all interfaces:
switch#clear lldp neighbors
See Also show lldp neighbors