Dell 8 - Show Cee Maps

Dell Converged Enhanced Ethernet Command Reference 257
53-1002115-01
show cee maps
16
show cee maps
Displays information on the defined CEE maps.
Synopsis show cee maps name
Operands name Restricts the output to report on only the named CEE map.
Defaults The default behavior without the optional operand is to report on all defined CEE maps.
Command
Modes
EXEC mode
Description Use this command to display information on a specified defined CEE map or on all of the defined
CEE maps. For each CEE map, the configuration state is displayed with a list of all of the Layer 2
interfaces bound to the CEE map.
Usage
Guidelines
Fabric OS v6.3.1_cee only allows the CEE map name “default.”
Examples none
See Also cee, cee-map