Dell 8 - Show Dot1 X Interface

284 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show dot1x interface
17
show dot1x interface
Displays the state of a specified interface.
Synopsis show dot1x interface [extengigabitethernet slot/port]
Operands extengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults There are no defaults for this command.
Command
Modes
EXEC mode
Description Use this command to display the state of a specified interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display the state of 10 Gbps Ethernet interface 0/16:
switch>show dot1x interface extengigabitethernet 0/16
Dot1x Global Status: Enabled
802.1X info for interface te0/16
-----------------------------------
Port Control: Auto
Port Auth Status: Unauthorized
Protocol Version: 2
ReAuthentication: Disabled
Auth Fail Max Attempts: 0
ReAuth Max: 2
Tx Period: 30 seconds
Quiet Period: 60 seconds
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
PAE State: Connected
BE State: Invalid
Supplicant Name: --
Supplicant Address: 0000.0000.0000
Current Id: 1
Id From Server: 0
See Also none