Dell 8 - Lldp Disable

Dell Converged Enhanced Ethernet Command Reference 107
53-1002115-01
lldp disable
6
lldp disable
Disables LLDP on the interface.
Synopsis lldp disable
no lldp disable
Operands none
Defaults By default, LLDP is enabled at both the global and interface levels.
Command
Modes
Interface configuration mode
Description Use this command to disable LLDP on the interface. Use the no lldp disable command to enable
LLDP on the interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To disable LLDP on the interface.
switch(conf-if-te-0/1)#lldp disable
See Also none