Dell 8 - Ip Igmp Last-Member-Query-Interval

Dell Converged Enhanced Ethernet Command Reference 203
53-1002115-01
ip igmp last-member-query-interval
12
ip igmp last-member-query-interval
Sets the last member query interval.
Synopsis ip igmp last-member-query-interval milliseconds
Operands milliseconds Response time in milliseconds. Valid range is 1000 to 25500 milliseconds.
Default value is 1000 milliseconds.
Description The last member query interval is the amount of time in seconds that the IGMP router waits to
receive a response to a group query message.
Defaults There are no defaults for this command.
Command
Modes
Privileged EXEC Mode
User Guidelines There are no user guidelines for this command.
Example none
See Also none