Dell 8 - Show Spanning-Tree Brief

Dell Converged Enhanced Ethernet Command Reference 175
53-1002115-01
show spanning-tree brief
11
show spanning-tree brief
Displays the status and parameters of the Spanning Tree Protocol.
Synopsis show spanning-tree brief
Operands none
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the status and parameters of the Spanning Tree Protocol. It includes
the port roles and port states. The following describes the port roles and states:
• Port roles—root port, designated port, alternate port and backup port.
• Port states—discarding, learning, and forwarding.
• Port types—edge port (PortFast), point-to-point, and shared port.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display the status and parameters of the Spanning Tree Protocol:
switch#show spanning-tree brief
Spanning-tree Mode: Rapid Spanning Tree Protocol
Root ID Priority 32768
Address 0005.1e76.1aa0
Hello Time 2, Max Age 20, Forward Delay 15
Bridge ID Priority 32768
Address 0005.1e76.1aa0
Hello Time 2, Max Age 20, Forward Delay 15, Tx-HoldCount 6
Migrate Time 3 sec
Interface Role Sts Cost Prio Link-type Boundary Edge
-------------------------------------------------------------------------
Te 0/0 DIS DSC 2000 128 P2P Yes No
Te 0/1 ALT BLK 2000 128 P2P Yes No
Te 0/2 RTPT BLK 2000 128 P2P Yes No
Te 0/3 DIS BLK 2000 128 P2P Yes No
Te 0/8 DIS DSC 2000 128 P2P Yes No
Te 0/19 DIS DSC 2000 128 P2P Yes No
Te 0/20 DIS DSC 2000 128 P2P Yes No
See Also show spanning-tree interface