Dell Converged Enhanced Ethernet Command Reference 225
53-1002115-01
show sflow interface
13
show sflow interface
Displays sFlow information on a specific interface.
Synopsis show sflow interface name
Operands interface name Specifies the name of the interface.
Defaults By default, sFlow is disabled on all interfaces.
Command
Modes
EXEC mode
Description Use this command to display sFlow information on a specific interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display sFlow statistics on 10 Gbps Ethernet interface 1/16:
switch#>show sflow interface tengigabitethernet 1/16
te 1/16
Configured sampling rate :8192
Actual sampling rate :8192
Counter polling interval :15
Samples rcvd from h/w :33
See Also show sflow
To Next Page
Loading...
