Dell 8 - Debug Ip Igmp All

202 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
debug ip igmp all
12
debug ip igmp all
Displays all IGMP information.
Synopsis debug ip igmp {all | group [A.B.C.D [interface [{in | ex}tengigabitethernet slot/port] interface
port-channel number| interface vlan vlan_id]]}
Operands all Displays all values.
A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
interface Use this keyword to specify any of the following interfaces:
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
Description Displays all of the IGMP packets received and sent, and IGMP-host related events.
Defaults There are no defaults for this command.
Command
Modes
Privileged EXEC mode
User Guidelines There are no user guidelines for this command.
Example none
See Also none