Dell 8 - Show Media Linecard

Dell Converged Enhanced Ethernet Command Reference 33
53-1002115-01
show media linecard
2
show media linecard
Displays the SFP information for all the interfaces of a specific line card.
Synopsis show media linecard number
Operands number Linecard number.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to display a summary of the SFP information for a specific line card. The output
contains information for each interface on the line card, and is several pages long.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To show the SFP information for line card number 0:
switch#show media linecard 0
Interface InTenGigabitEthernet 0/1
Identifier 3 SFP
Connector 7 LC
Transceiver 0000000000000010 10_GB/s
Name id
Encoding 6
Baud Rate 103 (units 100 megabaud)
Length 9u 0 (units km)
Length 9u 0 (units 100 meters)
Length 50u 8 (units 10 meters)
Length 62.5u 3 (units 10 meters)
Length Cu 0 (units 1 meter)
Vendor Name BROCADE
Vendor OUI 42:52:4f
Vendor PN 57-0000075-01
Vendor Rev A
Wavelength 850 (units nm)
Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max 0
BR Min 0
Serial No AAA108454100431
Date Code 081108
Temperature 44 Centigrade
Voltage 3246.8 (Volts)
Current 0.002 (mAmps)
TX Power 0.1 (uWatts)
RX Power 0.1 (uWatts)
(output truncated)
See Also show media interface, show media