Dell 8 - System-Description LINE

Dell Converged Enhanced Ethernet Command Reference 119
53-1002115-01
system-description LINE
6
system-description LINE
Sets the global system description specific to LLDP.
Synopsis system-description line
no system-description
Operands line Specifies a description for the LLDP system. The valid value is a maximum of
50 characters.
Defaults There are no default configurations for this command.
Command
Modes
Protocol LLDP mode.
Description Use this command to set the global system description specific to LLDP. Use no system-description
command to clear the global LLDP system description.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set the global system description specific to LLDP:
switch(conf-lldp)#system-description Dell
See Also system-name