Dell 8 - Clear Lacp

Dell Converged Enhanced Ethernet Command Reference 123
53-1002115-01
clear lacp
7
clear lacp
Clears the Link Aggregation Group Control Protocol (LACP) counters on a specific port-channel.
Synopsis clear lacp number counters
Operands number Specifies the port channel-group number. The range of valid values is 1-63.
counters Clears traffic counters.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to clear the LACP counters per specified channel-group.
Usage
Guidelines
There are no default configurations for this command.
Examples To clear the LACP counters for a specific port-channel:
switch#clear lacp 10 counters
See Also show lacp counters