Dell 8 - Show Monitor

Dell Converged Enhanced Ethernet Command Reference 229
53-1002115-01
show monitor
14
show monitor
Displays the monitoring information for all Port Mirroring sessions.
Synopsis show monitor
show monitor session session_number
Operands session_number Specifies a session identification number. The range of valid values is
0-65535.
Defaults There are no default configurations for this command.
Command
Modes
Exec Mode
Description Use this command to display monitoring information for all Port Mirroring sessions, or for a single
session.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display monitoring information for all Port Mirroring sessions:
switch#show monitor
See Also monitor session