Dell 8 - Debug Ip

82 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
debug ip
5
debug ip
Displays the IGMP and ICMP traffic on the switch.
Synopsis debug ip {[packet {[interface interface-type interface-number] | [count tx | rx]]}] | [icmp {[interface
interface-type interface-number] | [count tx | rx]}] | [igmp {[interface interface-type
interface-number] | [all] | [group multicast-grp-address]}]
Operands packet Enable IP packet debugging.
interface Displays the IP traffic for the specified interface only.
interface-type Network interface type (external TenGigabitEthernet interface, null,
port-channel, or VLAN).
interface-number
Layer-2 or layer-3 Interface number.
count Stops display after display count packets.
tx Counts only transmitted packets.
rx Counts only received packets.
icmp Displays the ICMP packets.
igmp Displays the IGMP packets.
all Enable all IGMP debugging.
group Enable IGMP debugging for multicast group.
multicast-grp-address
Multicast group address.
Description Use this command to display all IGMP or ICMP packets received or transmitted. Can be enabled
globally, per interface, or on a multicast group.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
User Guidelines There are no usage guidelines for this command.
Example none
See Also none